Specifications

CLI Tasks, Command Functions and Syntax
access list (set standard)
A-2 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Does not apply to MATRIX E7.
access list (set
standard)
Router Defines a standard IP access list by number when operating in
router mode. For details, refer to Section 14.3.7.2.
access-list access-list-number [insert | replace entry] | [move
destination source1 [source2]] {deny | permit} source
[source-wildcard]
advertised
ability (set port)
Switch Enables, disables and sets the advertised ability on one or more
ports. For details, refer to Section 4.2.5.4.
set port adv ability port-string {10 | 100 | 1000 | all} {half | full
| all} {disable | enable}
advertised
ability (show
port)
Switch Displays the advertised ability on one or more ports. For details,
refer to Section 4.2.5.3.
show port advertised ability [port-string]
alias (clear
node)
Switch Removes one or more node alias entries. For details, refer to
Section 11.2.5.5.
clear nodealias {port port-string | alias-id alias-id}
alias (set node)
Switch Enables or disables an alias agent on one or more nodes. For details,
refer to Section 11.2.5.3.
set nodealias {enable | disable} port-string
alias (show
node)
Switch Displays alias settings on one or more nodes. For details, refer to
Section 11.2.5.1.
show nodealias [port-string]
alias config
(clear node )
Switch Resets node alias state to enabled and clears the maximum entries
value. For details, refer to Section 11.2.5.6.
clear nodealias config
alias config
(show node )
Switch Displays alias configuration settings on one or more nodes. For
details, refer to Section 11.2.5.2.
show nodealias config [port-string]
CLI Task Mode Command Function and Syntax