Specifications

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-120 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.9.2 set flowlimit
Use this command to enable or disable flow setup throttling globally or on one or more port(s), or
to re-enable one or more port(s) that were disabled due to flow setup throttling.
set flowlimit {[system | port-string disable | enable] [port-string operational]}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable FST on Fast Ethernet front panel ports 1-5:
system |
port-string
disable | enable
Enables or disables FST globally or one specific port(s).
port-string
operational
Re-enables one or more ports disabled by the flow limit
shut down function (as described in Section 14.3.9.6).
Matrix>set flowlimit fe.0.1-5 enable