Specifications

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-119
Flow limit
shutdown
Whether flow limit shut down is enabled or disabled. Default
state of disabled can be changed with the set flowlimit
shutdown command (Section 14.3.9.6).
Flow limit
notification
interval
Interval in seconds at which an SNMP notification will be
sent when a specified flow limit is reached. This function
can be enabled, and the default interval of 120 can be
changed, with the set flowlimit notification command
(Section 14.3.9.7).
Flow limit
maximum
flowcount
Number of flows that, if exceeded, will trigger a configured
action. Set using the set flowlimit limit command
(Section 14.3.9.3).
Flow limit table Lists flow limits and assigned actions for FST port
classifications.
Table 14-8 show flowlimit Output Details (Continued)
Output What It Displays...