Specifications

General Configuration Command Set
Setting Basic Device Properties
3-40 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.2.9 show version
Use this command to display hardware and firmware information. Refer to Section 3.2.3 for
instructions on how to download a firmware image.
show version
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display version information:
Table 3-5 provides an explanation of the command output.
Matrix>show version
Slot Ports Model Serial Number HW Version FW Version
---- ----- --------- ------------- ---------- ---------
0 48 1H582-51 21436587OA 0 02.01.01
1 2 1G-2MGBIC N/A N/A N/A
2 2 1G-2TX N/A N/A N/A
Table 3-5 show version Output Details
Output What It Displays...
Slot Fixed front panel or expansion module slot location
designation. For details on how slots are numbered, refer to
Section 4.1.2.
Ports Number of ports in the fixed front panel or expansion
module.
Model Model number of the chassis or expansion module.