Specifications

Security Configuration Command Set
Configuring Access Lists
14-100 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.7 Configuring Access Lists
Purpose
To review and configure security access lists (ACLs), which permit or deny access to routing
interfaces based on protocol and source IP address restrictions.
Commands
The commands needed to review and configure security access lists are listed below and described
in the associated section as shown:
• show access-lists (Section 14.3.7.1)
• access-list (standard) (Section 14.3.7.2)
• access-list (extended) (Section 14.3.7.3)
• ip access-group (Section 14.3.7.4)