Specifications

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-68 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
PWA Guest
Network Status
Whether PWA guest user status is disabled or enabled with
RADIUS or no authentication. Default state of disabled can
be changed using the set pwa gueststatus command as
described in Section 14.3.5.12.
PWA Refresh Time Interval in seconds at which the PWA screen will refresh.
Default setting of 30 can be changed using the set pwa
refreshtime command as described in Section 14.3.5.5.
Port PWA port designation.
Mode PWA port control mode. Default setting of force authorized
can be changed using the set pwa portcontrol command as
described in Section 14.3.5.16.
Auth Status Whether or not the port state is disconnected, authenticating
authenticated, or held (authentication has failed).
Quiet Period Amount of time a port will be in the held state after a user
unsuccessfully attempts to log on to the network. Default
value of 60 can be changed using the set pwa quietperiod
command as described in Section 14.3.5.14.
MaxReq Maximum number of log on attempts allowed before
transitioning the port to a held state. Default value of 2 can
be changed using the set pwa maxrequests command as
described in Section 14.3.5.15.
Table 14-7 show pwa Output Details (Continued)
Output What It Displays...