Specifications

Process Overview: Routing Protocol Configuration
Configuring IRDP
13-90 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
13.1.4.8 show ip irdp
Use this command to display IRDP information.
show ip irdp [vlan vlan_id]
Syntax Description
Command Type
Router command.
Command Mode
Interface configuration: Matrix>Router(config-if(Vlan <vlan_id>))#
Command Defaults
If vlan vlan_id is not specified, IRDP information for all interfaces will be
displayed.
Example
This example shows how to display IRDP information for VLAN 1:
vlan vlan_id (Optional) Displays IRDP information for a specific
VLAN. This VLAN must be configured for IP routing as
described in Section 3.3.2.
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(vlan 1))#show ip irdp vlan 1
Interface 1 is not enabled