Specifications

IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
12-42 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
12.2.5.8 ping
Use this command to test routing network connectivity by sending IP ping requests. The ping utility
(IP ping only) transmits a maximum of five echo requests, with a packet size of 100. The application
stops when the response has been received, or after the maximum number of requests has been sent.
ping [-s] hostname | ip_address
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If -s is not specified, the ping will not be sent continuously.
Examples
This example shows output from a successful ping to IP address 182.127.63.23:
-s (Optional) Causes a continuous ping, sending one datagram
per second and printing one line of output for every
response received, until the user enters Ctrl+C.
hostname |
ip_address
Specifies a host name or an IP address of the system to ping.
Matrix>Router#ping 182.127.63.23
Reply from 182.127.63.23
Reply from 182.127.63.23
Reply from 182.127.63.23
------ PING 182.127.63.23 : Statistics ------
3 packets transmitted, 3 packets received, 0% packet loss