Specifications

IP Configuration Command Set
Reviewing and Configuring the ARP Table
12-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
12.2.3 Reviewing and Configuring the ARP Table
Purpose
To review and configure the routing ARP table, to enable proxy ARP on an interface, and to set a
MAC address on an interface.
Commands
The commands needed to review and configure the ARP table are listed below and described in the
associated section as shown:
• show ip arp (Section 12.2.3.1)
• arp (Section 12.2.3.2)
• ip proxy-arp (Section 12.2.3.3)
• ip mac-address (Section 12.2.3.4)
• arp timeout (Section 12.2.3.5)
• clear arp-cache (Section 12.2.3.6)