Specifications

IP Configuration Command Set
Reviewing and Saving the Routing Configuration
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 12-13
12.2.2.2 write
Use this command to save or delete the router running configuration, or to display it to output
devices.
write [erase | file [filename config_file] | terminal]
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If no parameters are specified, the running configuration will be displayed to the
terminal session.
NOTE: The write file command must be executed in order to save the router
configuration to NVRAM. If this command is not executed, router configuration changes
will not be saved upon reboot.
erase (Optional) Deletes the router-specific file.
file (Optional) Saves the router-specific configuration to
NVRAM.
filename
config_file
(Optional) Saves the router-specific configuration to a file.
terminal (Optional) Displays the current router-specific
configuration to the terminal session.