Specifications

Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
11-96 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.6.10 set cep initialize
Use this command to re-initialize convergence end points detection on one or more CEP-enabled
ports.
set cep initialize port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to re-initialize CEP ports fe.1.3-5
:
port-string Specifies the CEP-enabled port(s) to re-initialize. This must
be a port-string enabled for CEP using the set cep port
command as described in Section 11.2.6.3. For a detailed
description of possible port-string values, refer to
Section 4.1.2.
Matrix>set cep initialize fe.1.3-5