Specifications

Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
11-88 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.6.2 set cep
Use this command to globally enable or disable CEP detection.
set cep {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to globally enable CEP detection
:
enable | disable Globally enables or disables CEP detection.
Matrix>set cep enable