Specifications

Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-87
11.2.6.1 show cep
Use this command to display CEP phone detection settings.
show cep [connections] [detection] [policy] [[port] [port-string]]
Syntax Description
Command Defaults
If no parameters are specified, all CEP settings will be displayed for all ports.
Command Mode
Read-Only.
Examples
This example shows how to display CEP status for each detection type on port ge.0.1. In this case
the default state of disabled for each type has not been changed:
This example shows default CEP policy information. In this case, no policies have been configured
for the three CEP detection types:
connections (Optional) Displays CEP connections.
detection (Optional) Displays all discovery parameters being used for
CEP detection.
policy (Optional) Displays the global CEP policy per protocol.
port port-string (Optional) Displays CEP status for one or more ports. For a
detailed description of possible port-string values, refer to
Section 4.1.2.
Matrix>show cep port ge.0.1
CEP Detection: - disabled
ge.0.1
H323 phone - disabled
Siemens phone - disabled
Cisco phone - disabled
Matrix>show cep policy
CEP default policies
CEP Type Policy Index Policy Name
-------- ------------ ------------
H323
Siemens
Cisco