Specifications

Logging and Network Management Command Set
Managing Switch Network Addresses
11-52 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.3.10 set mac agingtime
Use this command to set the time in seconds to age out inactive MAC address entries.
set mac agingtime seconds
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the MAC aging time to 400:
seconds Specifies the number of seconds for MAC aging time. Valid
values are 10 to 630.
Matrix>set mac agingtime 400