Specifications

Logging and Network Management Command Set
Managing Switch Network Addresses
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-43
11.2.3.3 clear arp
Use this command to delete a specific entry or all entries from the switch’s ARP table.
clear arp [hostname | ip_address]
Syntax Description
Command Defaults
If hostname or ip_address are not specified, all ARP entries will be cleared.
Command Mode
Read-Write.
Example
This example shows how to delete entry 10.1.10.10 from the ARP table:
hostname |
ip_address
(Optional) Specifies the IP address in the ARP table to be
cleared. An IP alias or host name that can be resolved through
the DNS can be specified instead of an IP address.
Matrix>clear arp 10.1.10.10