Specifications

Logging and Network Management Command Set
Configuring System Logging
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-23
11.2.1.14 show logging audit-trail
Use this command to display the contents of a logging audit trail file. This will be a record of all
events that occur when users request and use specific system resources. The device can store up to
200 messages.
show logging audit-trail [file]
Syntax Description
Command Defaults
If file is not specified, the latest 200 Syslog messages stored in the audit-trail log
will be displayed.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows an excerpt of the output from the show logging audit-trail command:
file (Optional) Displays a specific audit-trail log file.
Matrix>show logging audit-trail
132 <5>Apr 7 14:14:07.48 10.1.130.14 rtrFE
[HOST_DISP_](host)Bad Source Address
detect from interface vlan 3 with a source address of 127.0.2.3 destined to 10.1
.129.78, Packet Dropped