Specifications

Logging and Network Management Command Set
Configuring System Logging
11-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.1.10 clear logging default
Use this command to reset logging default values.
clear logging default [facility] [severity] [port]
Syntax Description
Command Defaults
If no parameters are specified, all logging default values will be reset.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This command shows how to reset the Syslog default severity level to 5:
facility (Optional) Resets the default facility name to local7.
severity (Optional) Resets the default logging severity level to 5
(warning conditions).
port (Optional) Resets the default UDP port the client uses to
send to the server to 514.
Matrix>clear logging default severity