Specifications

Logging and Network Management Command Set
Configuring System Logging
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-7
IP Address Syslog server’s IP address. For details on setting this using
the set logging server command, refer to Section 11.2.1.6.
Facility Syslog facility that will be encoded in messages sent to this
server. Valid values are: local0 to local7.
Severity Severity level at which the server is logging messages.
Description Text string description of this facility/server.
Port UDP port the client uses to send to the server.
Status Whether or not this Syslog configuration is currently
enabled or disabled.
Table 11-1 show logging all Output Details (Continued)
Output What It Displays...