Specifications

IGMP Configuration Command Set
Reviewing IGMP Groups
10-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
10.2.3 Reviewing IGMP Groups
Purpose
Use this command to display the status of IGMP groups on the device. This includes the VLAN port
configured to transmit IGMP multicast transmissions, its VLAN ID, and the IP addresses of the
ports asking to receive those transmissions as part of the IGMP group.
Command
The command used to display IGMP groups is listed below and described in the associated section
as shown.
• show igmp groups (Section 10.2.3.1)