Specifications

IGMP Configuration Command Set
Enabling / Disabling IGMP
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 10-3
10.2.1.1 show igmp
Use this command to display IGMP information.
show igmp [groups | query-interval | response-time]
Syntax Description
Command Defaults
If no parameters are specified, IGMP status (enabled or disabled) will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display IGMP status:
groups (Optional) Displays a list of IGMP streams and client
connection ports.
query-interval (Optional) Displays (in seconds) the frequency of
host-query frame transmissions.
response-time (Optional) Displays (in tenths of a second) the maximum
query response time.
Matrix>show igmp
IGMP Snooping is disabled.