Specifications

Port Priority and Classification Configuration Commands
Configuring Port Traffic Rate Limiting
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 9-39
9.3.6.1 show port ratelimit
Use this command to show the traffic rate limiting configuration on one or more ports.
show port ratelimit [port-string]
Syntax Description
Command Defaults
If port-string is not specified, rate limiting information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current rate limits set for Fast Ethernet front panel ports 1
and 2. In this case, rate limiting is globally disabled, and is disabled on these ports. The threshold
on all priorities queues within these ports is set to the default value of 195000 bits per second.
port-string (Optional) Displays rate limiting parameters for specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.2.