Specifications

Port Priority and Classification Configuration Commands
Configuring Quality of Service (QoS)
9-12 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.3 Configuring Quality of Service (QoS)
Purpose
To configure one or more ports with the following Layer 2 switching features:
• Four priority queues on each port.
• Programmable scheduling per transmit (Tx) port according to fixed priority, weighted
round-robin (in percentage of traffic per queue), or hybrid algorithm.
Command Descriptions
The commands to configure the Quality of Service are listed below and described in the associated
section.
• show port qos (Section 9.3.3.1)
• set port qos sp (Section 9.3.3.2)
• set port qos wrr (Section 9.3.3.3)
• set port qos hybrid (Section 9.3.3.4)