Specifications

Port Priority and Classification Configuration Commands
Configuring Priority to Transmit Queue Mapping
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 9-9
9.3.2.1 show priority queue
Use this command to display the port priority levels (0 through 7, with 0 as the lowest level)
associated with the current transmit priority queue (0 -3, with 0 being the lowest priority) for each
priority of the selected port. A frame with a certain port priority is transmitted according to the
settings entered using the set priority queue command described in Section 9.3.2.2.
show priority queue [priority]
Syntax Description
Command Defaults
If priority is not specified, all priority queue information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows the type of information provided when you use the show priority queue
command. In this case, the frames shown with a priority of 0 or 3 are transmitted according to the
transmit priority queue of 1 (the second lowest transmit priority); frames with 1 or 2 priority, at the
lowest transmit priority of 0; frames with 4 or 5 priority, at the second highest transmit priority of
2; and frames with 6 or 7 priority, at the highest transmit priority of 3:
priority (Optional) Displays mapping of transmit queues for a
specific priority (0 - 7).
Matrix>show priority queue
Priority TxQueue
---------- ---------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3