Specifications

Port Priority and Classification Configuration Commands
Configuring Priority to Transmit Queue Mapping
9-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.2 Configuring Priority to Transmit Queue Mapping
Purpose
To do the following:
• View the current priority to transmit queue mapping of each port, which includes both physical
and virtual ports.
• Configure each port to either transmit frames according to the port priority transmit queues (set
using the set port priority command described back in Section 9.3.1.2), or according to a
priority based on a percentage of port transmission capacity (set using the set priority queue
command described in Section 9.3.2.2).
Commands
The commands used in configuring transmit priority queues are listed below and described in the
associated section.
• show priority queue (Section 9.3.2.1)
• set priority queue (Section 9.3.2.2)