Specifications

VLAN Configuration Command Set
Setting the Host VLAN
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-43
7.3.6 Setting the Host VLAN
Purpose
To configure a host VLAN that only select devices are allowed to access. This secures the host port
for management-only tasks.
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
• show host vlan (Section 7.3.6.1)
• set port vlan host (Section 7.3.6.2)
• clear host vlan (Section 7.3.6.3)
NOTE: The host port is the management entity of the device.