Specifications

VLAN Configuration Command Set
Assigning VLANs According to Classification Rules
7-28 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
7.3.5.1 show vlan classification
Use this command to display the VLAN ID (VID), protocol classification, and description of each
classification of the current entries.
show vlan classification
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Command Alternative (v2.05.xx and higher)
show policy class (Section 8.3.2.1)
Example
This example shows that the VLAN classification function is enabled, and that two VLAN
classifications have been configured on the device:
Matrix>show vlan classification
VLAN Classification enabled.
Vlan Classification Entries
--------------------------------
Vlan ID: 5, Src UDP Range: 45-53, Status: enabled,
Action Status: Forward No Frames
Port List: None
----------
Vlan ID: 7, Ethernet II Type: IP, Status: enabled,
Action Status: Forward All Frames
Port List: None