Specifications

VLAN Configuration Command Set
Reviewing Existing VLANs
7-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
7.3.1.1 show vlan
Use this command to display all information related to a specific VLAN or all VLANs known to
the device (static and dynamic).
show vlan [detail] [vlan-list | vlan-name]
Syntax Description
Command Defaults
• If detail is not specified, summary information will be displayed.
• If vlan-list or vlan-name are not specified, information for all VLANs will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display information for all VLANs. In this case, there is only one
VLAN, the default VLAN 1. This display shows that VLAN 1 is the default VLAN and it is enabled
to operate. There are 48 Fast Ethernet ports in its port egress list, which are configured to transmit
untagged frames. There are no VLAN 1 forbidden ports:
detail (Optional) Displays detailed attributes of one or more
VLANs.
vlan-list |
vlan-name
(Optional) Displays information for specific VLAN(s). For
VLAN name to display, it must first be set using the set
vlan name command. For details, refer to Section 7.3.2.2.
Matrix>show vlan
VLAN: 1 Name: DEFAULT Status: enabled
Egress Ports
fe.0.1-48
Forbidden Egress Ports
None
Untagged Ports
fe.0.1-48