Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-73
6.2.2.22 show spantree adminpoint
Use this command to display the administrative point-to-point status of the LAN segment attached
to a port.
show spantree adminpoint port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the point-to-point status of the LAN segment attached to Fast
Ethernet front panel port 3:
port-string Specifies the port(s) for which to display point-to-point
status. For a detailed description of possible port-string
values, refer to Section 4.1.2.
Matrix>show spantree adminpoint fe.0.3
admin point-to-point = AUTO for port fe.0.3