Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-63
6.2.2.12 set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
set spantree adminedge port-string {true | false}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet front panel port 11 as an edge port:
port-string Specifies the edge port. For a detailed description of
possible port-string values, refer to Section 4.1.2.
true | false Enables (true) or disables (false) the specified port as a
Spanning Tree edge port.
Matrix>set spantree adminedge fe.0.11 true