Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
6-58 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.2.8 show spantree portcost
Use this command to display cost values assigned to one or more Spanning Tree ports.
show spantree portcost port-string [sid]
Syntax Description
Command Defaults
If sid is not specified, path cost information for SID 0 will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the port cost for Fast Ethernet front panel port 3:
port-string Specifies the port(s) for which to display cost values. For a
detailed description of possible port-string values, refer to
Section 4.1.2
.
sid (Optional) Displays cost values for a specific SID.
Matrix>show spantree portcost fe.0.3
Port cost = 64 for port fe.0.3.