Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
6-54 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.2.4 show spantree blocked ports
Use this command to display the blocked ports in one or more Spanning Trees. A port in this state
does not participate in the transmission of frames, thus preventing duplication arising through
multiple paths existing in the active topology of the bridged LAN. It receives Spanning Tree
configuration messages, but does not forward packets.
show spantree blockedports [sid]
Syntax Description
Command Defaults
If sid is not specified, SID 0 will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the blocked ports in SID 1:
sid (Optional) Displays status for specific SID(s).
Matrix>show spantree blockedports 1
Port ge.0.1 in Blocking State.
Port ge.0.2 in Blocking State.
Port ge.0.3 in Blocking State.
Port ge.0.4 in Blocking State.
Port ge.0.5 in Blocking State.
Number of blocked ports in SID 1: 5