Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-46 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.1.38 clear spantree txholdcount
Use this command to reset the transmit hold count to the default value of 3.
clear spantree txholdcount
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the transmit hold count to 3:
Matrix>clear spantree txholdcount