Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-18 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.1.10 set spantree mstmap
Use this command to map a filtering database ID (FID) to a SID. Since VLANs are mapped to
FIDs, this essentially maps a Spanning Tree SID to a VLAN ID.
set spantree mstmap fid_num sid
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to map FID 3 to SID 2. This effectively maps VLAN 3 to Spanning Tree 2:
fid_num Specifies a FID to assign to the MST. Valid values are 1 -
4094, and must correspond to a VLAN ID created using the
set vlan command as described in Section 7.3.2.1.
sid Specifies a Multiple Spanning Tree ID. Valid values are 1 -
4094, and must correspond to a SID created using the set
msti command as described in Section 6.2.1.7.
Matrix>set spantree mstmap 3 2