Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.1.2 set spantree
Use this command to globally enable or disable the Spanning Tree protocol on the switch.
set spantree {disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable Spanning Tree on the device:
disable | enable Globally disables or enables Spanning Tree.
Matrix>set spantree disable