Specifications

SNMP Command Set

Configuring SNMP Notification Parameters

5-72 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

5.2.7.13 set snmp notifyprofile

Use this command to create an SNMP notify filter profile configuration. This associates a

notification filter, created with the set snmp notifyfilter command (Section 5.2.7.10), to a set of

SNMP target parameters to determine which management targets should not receive SNMP

notifications.

set snmp notifyprofile profile targetparam targetparam [volatile | nonvolatile]

Syntax Description

Command Defaults

If storage type is not specified, nonvolatile will be applied.

Command Type

Switch command.

Command Mode

Read-Write.

Example

This example shows how to create an SNMP notify profile named area51

and associate a target

parameters entry.

profile Specifies an SNMP filter notify name.

targetparam

Specifies an associated entry in the SNMP Target Params

Table.

volatile |

nonvolatile

(Optional) Specifies a storage type.

Matrix>set snmp notifyprofile area51 targetparam v3ExampleParams