Specifications

SNMP Command Set
Configuring SNMP Notification Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-61
5.2.7.4 show newaddrtrap
Use this command to display the status of the SNMP new MAC addresses trap function on one or
more ports.
show newaddrtrap [port-string]
Syntax Description
Command Defaults
If port-string is not specified, the status of the new MAC addresses trap function
will be displayed for all ports.
Command Mode
Read-Only.
Example
This example shows how to display the status of the new MAC address trap function on all Gigabit
Ethernet ports:
port-string (Optional) Displays the status of the new MAC addresses
trap function on specific port(s). For a detailed description
of possible port-string values, refer to Section 4.1.2.
Matrix>show newaddrtrap ge.*.*
New Address Trap Globally disabled
Port Enable State
------- -----------
ge.0.1 disabled
ge.0.2 disabled
ge.0.3 disabled
ge.0.4 disabled
ge.0.5 disabled
ge.0.6 disabled