Specifications

SNMP Command Set
Configuring SNMP Target Addresses
5-56 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
5.2.6.3 clear snmp targetaddr
Use this command to delete an SNMP target address entry.
clear snmp targetaddr targetAddr
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear SNMP target address entry “1”:
targetAddr Specifies the target address entry to delete.
Matrix>clear snmp targetaddr 1