Specifications

SNMP Command Set
Configuring SNMP Target Addresses
5-52 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display SNMP target address information:
Table 5-10 shows a detailed explanation of the command output.
Matrix>show snmp targetaddr
--- SNMP targetaddr information ---
Target Address Name = 1
Tag List = Console
IP Address = 127.0.0.1
UDP Port# = 0
Target Mask = 255.255.255.255
Timeout = 100
Retry count = 3
Parameters = v1ExampleParams
Storage type = nonVolatile
Row status = active
Target Address Name = 2
Tag List = Console
IP Address = 127.0.0.1
UDP Port# = 0
Target Mask = 255.255.255.255
Timeout = 100
Retry count = 3
Parameters = v2ExampleParams
Storage type = nonVolatile
Row status = active
Table 5-10 show snmp targetaddr Output Details
Output What It Displays...
Target Address Name Unique identifier in the snmpTargetAddressTable.
Tag List Tags a location to the target address as a place to
send notifications.
IP Address Target IP address.
UDP Port# Number of the UDP port of the target host to use.