Specifications

SNMP Command Set
Configuring SNMP MIB Views
5-40 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
5.2.4.1 show snmp view
Use this command to display the MIB configuration for SNMPv3 view-based access (VACM).
show snmp view [viewname subtree oid]]
Syntax Description
Command Defaults
If no parameters are specified, all SNMP MIB view configuration information will
be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display configuration information for the SNMP MIB view “internet”:
Table 5-8 provides an explanation of the command output. For details on using the
set snmp view command to assign variables, refer to Section 5.2.4.2.
viewname subtree
oid
(Optional) Displays information for a specific MIB view
and subtree.
Matrix>show snmp view internet
View Name: internet
Subtree OID: 1
View Type: Included.
Row Status: active
Storage Type: nonvolatile
Table 5-8 show snmp view Output Details
Output What It Displays...
View Name Name assigned to a MIB view.
Subtree OID Subtree object identifier.