Specifications

SNMP Command Set
Configuring SNMP Access Rights
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-37
5.2.3.4 show snmp authenticationtrap
Use this command to display the status of the SNMP authentication trap function.
show snmp authenticationtrap
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the SNMP authentication trap function:
Matrix>show snmp authenticatontrap
authentication traps enabled