Specifications

Overview: Link Aggregation
Configuring Static Port Trunking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-65
4.4.3.6 clear trunk port
Use this command to remove a port from a trunk when the device is set to port trunking mode.
clear trunk port trunk_name port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete Fast Ethernet front panel ports 5 through 7 from the “blue” trunk:
trunk_name Specifies the name of the trunk from which the port will
be removed.
port-string Specifies the designation of the port to be removed from
the trunk. For a detailed description of possible
port-string values, refer to Section 4.1.2.
Matrix>clear trunk port blue fe.0.5-7