Specifications

Port Configuration Command Set
Setting Flow Control and Thesholds
4-30 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Commands
The commands needed to set port flow control and thresholds are listed below and described in the
associated section as shown.
• show port flowcontrol (Section 4.2.6.1)
• set port flowcontrol (Section 4.2.6.2)
• show port buffer threshold (Section 4.2.6.3)
• set port buffer threshold (Section 4.2.6.4)
• show flow agetime (Section 4.2.6.5)
• set flow agetime (Section 4.2.6.6)
• clear flow agetime (Section 4.2.6.7)
• show port holbp (Section 4.2.6.8)
• set port holbp (Section 4.2.6.9)