Specifications

Port Configuration Command Set
Setting Speed and Duplex Mode
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-19
4.2.3.2 set port duplex
Use this command to configure the duplex type of one or more ports.
set port duplex port-string {full | half}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet front panel port 17 to full duplex:
port-string Specifies the port(s) for which duplex type will be set. For a
detailed description of possible port-string values, refer to
Section 4.1.2.
full | half Sets the port to full-duplex or half-duplex operation.
Matrix>set port duplex fe.0.17 full