Specifications

Port Configuration Command Set
Setting Speed and Duplex Mode
4-18 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
4.2.3.1 set port speed
Use this command to configure the default speed of a port interface. This setting only takes effect
on ports that have auto-negotiation disabled.
set port speed port-string {10 | 100 | 1000}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet expansion module 3, port 9, to a port speed of 10
Mbps:
port-string Specifies the port(s) for which speed will be set. For a
detailed description of possible port-string values, refer
to Section 4.1.2.
10 | 100 | 1000 Specifies the port speed. Settings can be 10 Mbps, 100
Mbps, or 1000 Mbps.
Matrix>set port speed fe.3.9 10