Specifications

General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
3-86 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.6.10 show port ciscodp neighborinfo
Use this command to display information about neighboring Cisco devices on one or more ports.
show port ciscodp neighborinfo [details] [port-string]
Syntax Description
Command Defaults
• If details is not specified, summary information will be displayed.
• If port-string is not specified, Cisco DP information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display a summary of information about neighboring Cisco devices
detected on Matrix port ge.0.4. In this case, a device is connected at the neighboring device’s
module 2, port 1 link:
details (Optional) Displays detailed information.
port-string (Optional) Displays information about specific port(s). For
a detailed description of possible port-string values, refer to
Section 4.1.2.
Matrix>show port ciscodp neighborinfo ge.0.4
Sysname Platform Port ID
----------------------------------------------------------------
ge.0.4 ggismysysname WS-C6509 2/1