Specifications

General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
3-84 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.6.9 show port ciscodp info
Use this command to display summary information about the Cisco Discovery Protocol on one or
more ports.
show port ciscodp info [port-string]
Syntax Description
Command Defaults
If port-string is not specified, Cisco DP information will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display Cisco Discovery Protocol information for all Gigabit Ethernet
ports:
Table 3-8 provides an explanation of the command output.
port-string (Optional) Displays information about specific port(s). For
a detailed description of possible port-string values, refer to
Section 4.1.2.
Matrix>show port ciscodp info ge.*.*
Port State VVID #Neigh PDU-TX PDU-RX CosExt TrustExt
-----------------------------------------------------------------
ge.0.1 Disabled none 0 0 0 undef undef
ge.0.2 Disabled none 0 0 0 undef undef
ge.0.3 Disabled none 0 0 0 undef undef
ge.0.4 Disabled none 0 0 0 undef undef
ge.0.5 Disabled none 0 0 0 undef undef
ge.0.6 Disabled none 0 0 0 undef undef