Specifications

General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
3-80 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.6.5 set ciscodp status
Use this command to enable or disable Cisco Discovery Protocol on the device.
set ciscodp status {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Cisco Discovery Protocol on the device:
enable | disable Enables or disables Cisco Discovery Protocol.
Matrix>set ciscodp status enable