Specifications

General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-79
Holdtime (TTL) Number of seconds neighboring devices will hold PDU
transmissions from the sending device. Default value of 180
can be changed with the set ciscodp holdtime command as
described in Section 3.2.6.7.
Platform Description of the sending device.
Version Sending device’s firmware version.
Device ID Sending device’s serial number.
PopulateCDP Whether the populate Enterasys (CDP) discovery protocol
function is enabled or disabled. Default setting of disabled
can be changed with the set ciscodp populatecdp command
as described in Section 3.2.6.8.
Table 3-7 show ciscodp Output Details (Continued)
Output What It Displays...