Specifications

General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
3-78 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.6.4 show ciscodp
Use this command to display global Cisco Discovery Protocol information.
show ciscodp
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display Cisco Discovery Protocol information. In this case, defaults
have not been changed:
Table 3-7 provides an explanation of the command output.
Matrix>show ciscodp
CiscoDP : Disabled
Timer : 60
Holdtime (TTL) : 180
Platform : Matrix 1G587-09
Version : 03.02.00
Device ID : 0123456789
PopulateCDP : Disabled
Table 3-7 show ciscodp Output Details
Output What It Displays...
CiscoDP Whether Cisco Discovery Protocol is disabled or enabled.
Default setting of disabled can be changed with the set
ciscodp status command as described in Section 3.2.6.5.
Timer Number of seconds between Cisco Discovery Protocol PDU
transmissions. Default value of 60 can be changed with the
set ciscodp timer command as described in Section 3.2.6.6.