Specifications

General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-77
3.2.6.3 set cdp interval
Use this command to set the message interval frequency of the Enterasys Discovery Protocol.
set cdp interval frequency
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the CDP interval frequency to 15 seconds:
frequency Specifies the transmit frequency of Enterasys Discovery
Protocol messages in seconds.Valid values are from 5 to
900.
Matrix>set cdp interval 15